
DELTA-03 DIGITAL SEISMIC SIGNAL RECORDER
The Delta Seismic Recorder is designed to detect seismic signals from external (natural and artificial) seismic vibrations. It is a permanent seismic station with the possibility of data logging to a removable high‐capacity flash disk, and data transmission to a PC for real‐time analysis and recording.
The Delta Seismic Recorder is designed to detect seismic signals from external (natural and artificial) seismic vibrations.
It is a permanent seismic station with the possibility of data logging to a removable high‐capacity flash disk, and data transmission to a PC for real‐time analysis and recording.
The Delta‐03 includes the Delta‐03M signal recorder, cables, a magnetic antenna, a PCMCIA Flash disk (2 …. 32GB), and a socket to connect with the seismic cable.
FEATURES
•4 (8) channels for easy connection to any sensor (i.e., seismometers,accelerometers)
•Low power consumption
•Remote control
•Embedded mode of accuracy with internal GPS
•Geophone calibration mode
•Removable mass storage
•Small size and lightweight.
APPLICATIONS
•Micro‐zonation surveying
•Earthquake Early Warning
•Aftershock Warning.
COMMUNICATIONS
PC‐based via interfaces Ethernet 10/100 and RS‐232
SYNCHRONIZATION
Performed in real time; Recorder uses the high‐stability TCXO to maintain time accuracy; Internal GPS receiver sets and calibrates real‐time clock automatically within time points specified by operator or at the command of an operator.
TELEMETERING NETWORKS
The recorder is designed to be part of a telemetering network using the GSM system or satellite modems in the data transfer mode or telephone modems; Telemetering networking is possible using the Internet via GPRS modems and local networks with an external IP address.
SOFTWARE
The software is designed for Windows 9x/Me/2000/XP.
Specifications
Number of Channels | 4 or 8 |
Dynamic Range (100Hz) | 133 dB |
Tempature range | -40..+60ºC |
Input voltage | 10,5..20B |
Power consumption: | |
Writing to disk, no communication 4ch (8ch) | 1W(1,4W) |
Writing to disk, no communication 4 ch (8ch) | 1,2W (1,6W) |
Interface: | |
Ethernet | 100Base-T |
RS-232 | |
A/D Converter | 24-bit |
Gain Selection | 1,4,16,64 |
Maximum Input Signal | 5 B |
Common mode rejection | not less than 110 dB |
Noise level (at 50 Hz) | 0,013 |
Sample rates,sps | 25, 31.25, 50, 62.5, 100, 125, 200, 250, 500, 1000 |
FIR Filter | 130 dB |
GPS-receiver | Internal |
Free-running Accuracy | 2·10-7 |
Recording capacity | PCMCIA Flash disk (2...32Gb) |
The recorder can be packaged with compatible Lennartz velocimeters: LE-3DLite (1 .. 80 Hz); LE-3D/5s (0.2 .. 40 Hz); LE-3D/20s (0.05 .. 40 Hz) or accelerometers: A1632; A0531.
The recorder can be operated with any other types of seismometers.